• Gate Length and Weight - Up to 20' in length and 1000 lbs
• Gate Materials - Wood, Steel, Aluminum, Vinyl, Chain Link, and more
• Gate Post or Column Size (pull to open design) - Max 12"x12" post or gate mounted 6" from the rear face of a column (the gate side facing the property)
• Push to Open - Yes (longer bracket may be needed in some situations and can be purchased separately); setback does not apply to push to open
• Power - Battery (included) and Low Voltage Trickle Charge (included; 12V DC system)
• Solar Compatible - Yes

The GTO/PRO GP-SW4000 Single Opener is a practical system that allows for easy installation. The low voltage design allows the customer to use a household outlet within 1,000 ft. of the operator by running a 16-guage low voltage cord between the two. For customers who are eco-friendly, or who wish to save on electrical bills, it is also possible to use a solar panel to charge the battery. The GTO/PRO SW4000's oversized control box can hold two 7 amp/hour batteries (second battery not included). This means the unit has the capacity for extra power storage for solar power, as well as for higher opening cycle situations.

Aside from being practical, this unit is also versatile. Useful for residential situations, this opener can be used with gates constructed from a variety of materials, including farm tubing, steel, aluminum, wood, and chain link, along with many others. Likewise, the GTO/PRO GP-SW4000 can be enhanced with a push-to-open bracket accessory to push the gate open away from the property, while the arms remain mounted on the side closest to the property. Depending on where the brackets are positioned and the position of the hinge, a longer bracket than the included 10" bracket may be needed to give the arm 2" of clearance in the open position. Finally, this model is compatible with GTO Inc.'s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, etc.

• Learn Mode - The learning mode allows the costumer to set end points with a remote. Using the transmitter, the user tells the opener where to stop, and then these settings can be saved on the control board.
• Soft Start/Soft Stop - This feature eases the wear and tear on the gate. During a normal cycle, the opener automatically slows the motion of the gate near the stop points so the gate closes smoothly and with minimal impact. This feature can also be switched off.
• Closing Timer - The closing timer allows the customer to set the gate to close automatically at 0 to 120 seconds after the gate has reached the full open position. The customer also has the option of leaving this feature off so the gate remains open until an entry device activates the closing motion.

QB ID: SW4000XL